ka und alte code wieder zurücl

INF/sketch_daniel_cwikla/sketch_daniel_cwikla.ino

@@ -0,0 +1,37 @@
+//  ---------------------------------
+//  |         DANIEL CWIKLA         | 
+//  ---------------------------------
+//  Aus irgend einem Grund gingen die LEDS
+//  nicht an obwohl die Pins richtig sind.
+
+const int gr_led = 33;
+const int rt_led = 32;
+void setup() {
+  pinMode(gr_led, INPUT);
+  pinMode(rt_led, INPUT);
+  Serial.begin(115200);
+  digitalWrite(gr_led, LOW);
+  digitalWrite(rt_led, LOW);
+  Serial.println("TEST");
+}
+
+void loop() {
+  directionControl();
+  delay(1000);
+}
+
+void directionControl(){
+  digitalWrite(gr_led, HIGH);
+  digitalWrite(rt_led, HIGH);
+  Serial.println("Motor gerade aus ---");
+  delay(2000);
+
+  digitalWrite(gr_led, LOW);
+  digitalWrite(rt_led, HIGH);
+  Serial.println("Motor rechts -|");
+  delay(2000);
+
+  digitalWrite(gr_led, LOW);
+  digitalWrite(rt_led, LOW);
+  Serial.println("Motor aus __");
+}